RP6 Sample Draw Pump Kit for GX-2001 and GX-2009

Out of stock - Usually ships in 2 - 3 days
This item has been discontinued.

The RP-6 Sample Draw Pump is a pump that can be attached to diffusion monitors for sampling purposes. It is housed in a plastic case with quick connect fittings on both ends of the unit.

The RP-6 comes with a 4 in. rubber connector along with a 10 in. hose and probe. The probe will come with a dust filter inside to keep the unwanted dust from getting into the pump.

The RP-6 will operate on just one AA alkaline battery for 5 hours. The rotating ON/OFF switch is located at the inlet end of the RP-6 Pump. When the pump is on, the green LED light will show, and when the pump is off there will be no light. If your pump starts to flash red, then it is letting you know that you are in low flow alarm.

For use with the GX-2001 and the GX-2009.

  • Power supply: 1 AA battery
  • Continuous operation: 5 hours
  • Operating temperature and humidity: -10C- + 40C (14 to 104F), 0 to 95% RH
  • Sampling flow rate: 0.5 liters per minute
  • Low flow alarm: Blinking red LED
  • Low battery alarm: Blinking green LEL
Part Number:
More Information
Price $420.00
SKU RKI01-81-1166RK
Product Weight (lbs.) No
Weight 2.0000
Brand RKI Instruments
Accessory No
BW Parts No
Gas Type N/A
BW Sensors No
MPN 81-1166RK
Color No
Write Your Own Review
You're reviewing:RP6 Sample Draw Pump Kit for GX-2001 and GX-2009
Your Rating
Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.