DBI-SALA Nano-Lok 6 ft. SRL Aluminum Snap Hook 3101210

Available - Usually ships in 5 - 7 days
Regular Price $172.00 Sale Price $147.43 You Save $24.57
  • Buy 5 for $143.34 each and save 3%
  • Buy 10 for $139.46 each and save 5%
This 6 ft. compact single-leg Nano-Lok self-retracting lifeline (SRL) features a lightweight aluminum snap hook with a 3/4 in. (19mm) gate opening, and a convenient anchor loop for connection to your harness (using your own carabiner or other suitable connector). You get powerful, safe fall protection from an SRL that weighs less than 2 lbs.

Tension on the lifeline keeps it out of your way, which helps to reduce trip falls. The 6 ft. lifeline retracts into a thermoplastic housing, and locks quickly if there's a fall, usually within 24 inches. Nano-Lok SRLs also have an industry-leading weight capacity of 420 lbs., the highest on the market.

A self-retracting lanyard such as the Nano-Lok 3101210 affords the user greater protection at low heights. Because fall distances are shorter, self-rescue is a much greater possibility. Traditional shock-absorbing lanyards require 18 ft. of fall clearance, so the Nano-Lok is a major improvement in fall protection.

No SRL on the market is safer. Nano-Loks meet or exceed the following standards: OSHA 1926.502, 1910.66; ANSI Z359-2007 & A10.32.

Product Weight:
1.87 lbs.

Product Number:
More Information
SKU DBI01-3101210
Price $172.00
Weight 2.0000
MPN 3101210
Safety Standard OSHA, ANSI
Lifeline Material Nylon Webbing
100% Tie Off No
Weight Capacity 420 Pounds
UPC 840779012695
Color No
Write Your Own Review
You're reviewing:DBI-SALA Nano-Lok 6 ft. SRL Aluminum Snap Hook 3101210
Your Rating

1 Item

Show per page
  1. J W Wojcio

    2014-05-09 15:31:51

    Will this unit lock on a vertical shock....i.e. connected to the floor of a man lift basket and the operator gets ejected upward or goes over the rail system which is above the unit by 36+ inches?

    1 answer
    1. Justin

      2014-05-09 15:31:51

      The manufacturer says this application works fine with the 3101210 Nano-Lok. Just make sure to use an appropriate connector, and keep the shock pack end of the unit attached to the worker instead of the bucket anchor.<br>
      DBI-SALA also makes a specific SRL for bucket trucks and aerial lifts. Consider the Nano-Lok Arc Flash SRL for Bucket Truck/Aerial Lift 3101375 if the workers are dealing with electrical applications.

Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.