Miller Twin Turbo Self Retracting Lifeline with G2 Connector, MFLC-12-Z7/6FT

Available - Contact us for availability
The 6 ft. Miller Twin Turbo PFLs connect with the low-profile Miller G2 connector below the dorsal D-ring of the worker's harness to provide lightweight, 100% tie-off. Aluminum rebar (pelican) hooks make attachment to a wide variety of attachment points on your structure easy. The 2.25 in. gate openings on the hooks allow you to hook onto poles and other large anchorage points.

Key Features:
  • 6 ft. webbing lifelines on each TurboLite PFL
  • Aluminum rebar hooks rated to 3,600 lbs.
  • G2 connector attaches below the dorsal D-ring
  • Reduced fall clearance requirements
  • PFLs swivel independently preventing twisting and binding of the harness
  • Lightweight
  • Corrosion-resistant aluminum connector
  • Meets ANSI Z359.14-2012 Class A & B, ANSI A10.32-2012, CSA Z259.2.2, ANSI Z359.12-2009, CSA Z259.12-11 standards
Total Weight:
5.8 lbs.

Part Number:


More Information
Price $381.55
Product Weight (lbs.) 5.8
Weight 7.0000
Brand Miller Fall Protection
Safety Standard OSHA, ANSI, CSA
100% Tie Off Yes
Weight Capacity 310 Pounds
UPC 612230209896
Color No
Write Your Own Review
You're reviewing:Miller Twin Turbo Self Retracting Lifeline with G2 Connector, MFLC-12-Z7/6FT
Your Rating

1 Item

Show per page
  1. Brian

    2017-01-09 19:37:08

    Can the Miller Twin Turbo SRL System with G2 Connector MFLC-12-Z7/6FT be attached to any harness? and if so how is it to be attached.

    1 answer
    1. Alan

      2017-01-09 19:37:08

      <p>If you see the second thumbnail on this part of the site: <a href=""> </a></p>
      <p>You'll see that the carabiner can open up and slide behind the D-ring.  So if the harness you're using has that option, then it'll be compatible with it.  If your harness does not have a slot for the carbiner to slide through on the back behind/under the D-ring, then it won't work.</p>

Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.