Miller MightEvac Confined Space SRL Tripod Hoist MR50GC-Z7/50FT
The MR50GC-Z7/50FT is a Miller confined space entry system with a 7 ft. aluminum tripod capable of withstanding a 5,000 lb. load, a 50 ft. MightEvac ANSI Z359-rated emergency SRL and retrieval hoist, mounting bracket, and pulley. This rugged system is easy to set up, and works smoothly and efficiently in the event of an emergency.
The MightEvac self-retracting lifeline (SRL) has a galvanized wire rope lifeline and is rated to a 310 lb. total weight capacity. Even at this maximum weight, retreival of a fallen worker is easy. The MightEvac has a 4:1 mechanical advantage that can lift at approximately 25 ft. per minute. This hoist is for emergency evacuation only and shouldn't be used to move personnel and materials under normal circumstances.
The high-strength aluminum tripod has adjustable legs for easy adjustment over uneven surfaces and a safety chain as well as rubber skid plates on the tripod feet help prevent slipping. The outside edges of the legs have reflective tape for low-light visibility for others on the job site. The tripod is a maximum of 7 ft. tall and can be set up within minutes.
- 50 ft. evacuation hoist/SRL
- Galvanized steel lifeline
- 7 ft. aluminum tripod
- Carabiner and pulley included
- SRL meets or exceeds ANSI Z359.1-2007, OSHA, and CSA standards
|Brand||Miller Fall Protection|
what is the part number for the pulley and the carrrabiner for a Miller tripod for connfined space use? Just need the carrabiner and the pulley that it hooks to.1 answer
On the Miller MR50GC-Z7 tripod retrieval system, regardless of length, the carabiner and snatch block (pulley) part numbers are as follows;<br>
CP105 snatch block<br>