Draeger X-Dock Bump Testing and Calibration Station

Available - Usually ships in 5 - 7 days
SKU
DRA01-8321900
$2,439.78
The Draeger X-dock Series provides facilities using gas monitors full control over their Draeger gas detection equipment. The X-dock provides automatic bump tests and calibrations with greatly reduced test gas consumption and shorter testing times. The X-dock works with all single gas PACs (PAC 3500, PAC 5500, PAC 7000) as well as the following X-am monitor models: X-am 1700, X-am 2000, X-am 2500, X-am 5000, X-am 5600.

Keep one unit fully charged and ready or chose the modular stations that can be expanded up to ten units. Depending on the needs of your company, master controllers are available with either three or six test gas connections, plus fresh air.

The X-dock units can be used as stand alone bump test stations with no PC needed. The resistive touch screen is easy to operate, even with gloved hands. Documentation and reporting is automatically stored. The stored information is simple to download and analyze, and can be accessed quickly if the need arises. If documentation is needed, a post script printer connection maintains the ability to print out any needed paperwork immediately.

X-dock 5300 X-am:
  • For X-am 1700 Series, 2000 Series or 5000 Series Gas Monitors
  • One master (3 gases) controller
  • One (1) instrument module (limited to one module)
  • Power supply regulator(s) sold separately
X-dock 5300 Pac:
  • For Pac 3500, 5500, and 7000 Series Monitors
  • One master (3 gases) controller
  • One (1) instrument module (limited to one module)
  • Power supply regulator(s) sold separately
X-dock 6300 Master:
  • Master control unit
  • Three (3) test gas connections plus fresh air
  • At least one (1) module must be ordered 10 modules maximum per X-dock 6300 Master
  • Regulator(s) and power supply sold separately
X-dock 6600 Master:
  • Master control unit
  • Six (6) test gas connections plus fresh air
  • At least one (1) module must be ordered 10 modules maximum per X-dock 6600 Master
  • Regulator(s) and power supply sold separately
X-dock Module X-am:
  • Single cradle
  • Fits X-am 1700 Series, 2000 Series or 5000 Series Gas Monitors
X-dock Module X-am Plus:
  • Single cradle
  • Fits X-am 1700 Series, 2000 Series or 5000 Series Gas Monitors
  • Features additional charging function
X-dock Module Pac:
  • Single cradle
  • Fits Pac 3500, 5500, and 7000 Series Monitors
  • Features additional charging function
The X-dock Series provides documentation and evaluations of the monitors being tested for compliance as well as anticipating service needs to keep your gas detection program operating efficiently. The X-dock can help you to produce a clear overview of all the Draeger gas detection units within your organization.With the Draeger X-dock, calibrations and bump tests use far less gas. In fact, the X-dock Series reduces total gas usage by 40% or more, and the unit saves time by completing bump tests in only 10-15 seconds. This dramatic savings will make the X-dock pay for itself over time.

This calibration station is easy to use and requires minimal training for the operator. The interface is intuitive and the unit stores data for later review.

Comprehensive alarms and sensor tests provide increased safety to the workers who are using the units. Instrument assignment allows the person calibrating and reviewing the information to keep track of each monitor and know which worker is using them. The data created by the gas monitors and stored and compiled in the X-dock can be reviewed and manipulated for a greater understanding of the work environment and the specific workers who are using the units. This data is also easy to share with other personnel.

If you are interested in tracking all X-dock units across your facility, proprietary X-dock manager software licenses can be obtained which provides incredible analytical and coordinative capabilities.

FAQs:
How Often Do I Need To Calibrate My Monitor?

Part Numbers:
8321880 - X-dock 5300 for X-am Monitors
8321881 - X-dock 5300 for Pac Monitors
8321900 - X-dock 6300 Master 3-test gas console
8321901 - X-dock 6600 Master 6-test gas console
8321890 - X-dock X-am module
8321891 - X-dock X-am+ module with charging function
8321892 - X-dock Pac module
More Information
Price $2,439.78
SKU DRA01-8321900
Product Weight (lbs.) No
Weight 4.3100
Brand Draeger
Accessory No
BW Parts No
Gas Type No
BW Sensors No
MPN 8321900
UPC No
Color No
Write Your Own Review
You're reviewing:Draeger X-Dock Bump Testing and Calibration Station
Your Rating
Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.