Allegro Economy Supplied Air Face Shield with Low Pressure Adapter
- Buy 5 for $208.34 each and save 3%
- Buy 10 for $202.71 each and save 5%
The lens is polycarbonate and has a reinforced chin guard for added strength. Inside there is a cotton shroud that keeps the good air concentrated in front of the face and prevents overspray or other particles from getting.
The 9903-D is a face shield and SAR hood that complies with ANSI Z87.1-2003 and is NIOSH approved.
- Ideal for work with flying particles
- Large lens
- Meets ANSI standards
- Comes with low pressure adapter
- Ratcheting headband assembly
|Product Weight (lbs.)||N/A|
|Protection From||Most Dusts|
Will this item work with the 1/4 horse power pump. the same pump featured in the one worker full face mask system on your site?1 answer
Yes, the <a href="https://www.pksafety.com/allegro-9806-airline-pump.html">Allegro 9806 A-300 Ambient Air Pump</a> is a perfect fit for the face shield.
I will be using this product for spraying paint. The paint being used is very potent smelling. Will this face shield provide protection from paint fumes?1 answer
This mask must be used with an ambient air pump system like the <a href="https://www.pksafety.com/allegro-face-shield-9903-d.html">Allegro 9806 A-300</a> which pushes clean air to the mask. With the pump this mask is ideal for certain types of painting where cartridges and filters are unable to scrub the air for the worker. <br>
Here's a link to a <a href="http://blog.pksafety.com/supplied-ambient-air-systems-for-painters/">blog about supplied air systems</a> that may answer some more questions.
Assuming proper use of the mask, approximately what air rate in cubic feet per minute (cfm) ensures that no exterior air enters the mask?1 answer
The Allegro 9903-D Air Shield requires a minimum of 6 cubic feet per minute (CFM) of Grade D breathable air to perform correctly. Using the Allegro 9821 1/4hp air pump is a common way to provide the proper amount of airflow. As a low pressure, constant flow respirator, this unit should not be used in an Immediately Dangerous to Life and Health (IDLH) atmosphere. Though against most common industrial applications, the hood is a great way to provide worker protection, without the hassle of fit testing. Works well with most facial hair and beards, so long as they don’t compromise the seal.
Can you wear glasses using this equipment?
Glasses cannot be worn with this face shield. The only low pressure mask that can accept a glasses mount kit is the Allegro 9901