Allegro Nova 2000 Abrasive Helmet Airline System 9285-01

Available - Usually ships in 3 - 4 days
The Nova 2000 Abrasive Blasting helmet kit from Allegro provides a single worker with a complete low pressure respiratory protection solution - right out of the box. Using this helmet allows workers with facial hair and those wearing prescription safety glasses to effectively seal out contaminated air. With this constant flow airline kit we combine a 3/4HP pump, hose and Helmet.

This kit is an effective way to offer supplied air respiratory protection for a wide variety of abrasive blasting applications. A single worker can sand or media blast while receiving air from a source independent of the ambient area. The blast helmet supplies filtered air across the entire head. The lens on the helmet is rated for impact eye protection, so safety glasses are not required, but would not be a bad idea to wear as well.

Part Number:
9285-01 50 ft. hose
More Information
SKU ALL02-9285-01
Price $1,457.15
Weight 80.0000
Size No
Filter No
Color Green
Protection From Most Dusts, Lead and Asbestos, Lead, Asbestos, Organic Vapors, Mold, Chlorine (Bleach), Particulate Aerosols Free of Oil, Acid Gas Irritants
Brand Allegro
MPN 9285-01
UPC 741851928005
Write Your Own Review
You're reviewing:Allegro Nova 2000 Abrasive Helmet Airline System 9285-01
Your Rating

1 Item

Show per page
  1. Todd Clegg

    2014-09-03 20:18:56

    Does this pump run off of 110. and does it come with the hose and how long of hose can I run with this pump? What is the duty cycle of the pump?

    1 answer
    1. Chris

      2014-09-03 20:18:56

      The airline pump does run on standard 110/120 VAC wall outlet. Power draw is rated at 8.3 amps. Power cord is included.<br><br>

      The Allegro 9285-01 abrasive blast hood system comes with a 50 foot x 1/2 inch airline hose. This is a heavy duty version of their usual half inch hose, having thicker walls to resist potential erosion by sand blasting. This abrasive blasting hood and pump combination may be used with a maximum 100 foot hose. This may be accomplished by adding an additional 50 foot hose, p/n ALL02-2035, or by purchasing a 100 foot hose, p/n ALL02-2036.
      With regard to duty cycle. I spoke with tech support at Allegro, and they stated that the motor/pump assembly is rated for continuous use, so long as maintenance procedures are adhered to. I didn’t find documentation of this in the attached user manual, so will have to go on what I am told.

Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.