3M 60923 P100 Organic Vapor / Acid Gas Filter (Pair)

In stock
100% of 100
  • Buy 30 for $23.39 each and save 3%
  • Buy 60 for $22.76 each and save 5%
The 3M 60923 combination cartridge is intended for use in a variety of applications including petrochemical, laboratories, pharmaceutical and chemical manufacturing. The 60923 combines an organic vapor/acid gas cartridge with a P100 HEPA filter. The activated charcoal in the cartridge is specially treated to absorb both organic vapors (solvent vapors for instance) and acid gases (such as fumes from acid core solder). Then the P100 HEPA filter traps microscopic particles (99.9% greater than .3 microns in size) to keep out things like lead fumes.

A combination cartridge has the advantage of combining a filter and a cartridge, but we generally let people know that the breathing resistance is increased. This means that pulling air through the assembly is harder than either the cartridge or filter alone. Something good to keep in mind when planning your work.

When your mask is properly fitted, the cartridge asembly helps to protect your lungs from certain organic vapors, chlorine (bleach), hydrogen chloride, sulfur dioxide, or hydrogen sulfide (escape only) or hydrogen fluoride and particulates at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are immediately dangerous to life or health (IDLH).

Sold in a pouch of 1 pair. Fits both the 6000 and 7500 masks.

Part Number:
More Information
Price $24.06
SKU MMM01-60923
Weight 0.3000
Protection From Most Dusts, Lead and Asbestos, Organic Vapors
Brand 3M
MPN 60923
UPC 50051138464672
Write Your Own Review
You're reviewing:3M 60923 P100 Organic Vapor / Acid Gas Filter (Pair)
Your Rating

7 Item(s)

Show per page
  1. mike

    2015-01-07 23:17:06

    Will the 60923 p100 vapor gas cartridge protect u from asbestos? ?

    1 answer
    1. Chris

      2015-01-07 23:17:06

      The 3M 60923 combination cartridge has a P100 (HEPA) filter attached to an acid gas/organic vapor cartridge. The P100 filter portion of this assembly is the correct choice for protecting your lungs from asbestos fibers. The absorbent cartridge may be helpful for other applications on your job, such as chlorine bleach or solvent vapors.

  2. Kenison

    2016-06-22 19:15:06

    How many of them do I get when the quality is 1

    1 answer
    1. Alan

      2016-06-22 19:15:06

      This comes by the pair. So if you order quantity 1, you'll get a pair.

  3. Runyon

    2016-09-29 21:36:44

    I want to wear the mask during dust storms while working? I currently have the mask and one extra set of filters. Presently in Iraq.

    1 answer
    1. Alan

      2016-09-29 21:36:35

      Wearing the respirator in a dust storm is fine, but because of the heavy dust environment, you may need to change out the filter/cartridge sooner than usual.

  4. Jean

    2016-10-06 16:27:57


    Would the 60923 be appropriate for "basic" welding fumes (stick welding with mostly steel material)? There's an aeration system in place however I would rather be extra safe...

    Thank you!

    1 answer
    1. Alan

      2016-10-06 16:27:57

      Yes, this cartridge/filter combination would be fine for welding fumes.

  5. Annisa

    2016-12-22 17:58:06

    Can we use this mask for acid and organic mists?

    1 answer
    1. Alan

      2016-12-22 17:58:06

      The P100 filter that is enclosed within the cartridge will protect you from the acid and organic mists.

  6. Christine

    2017-04-30 00:00:00

    Would this mask work for mold remediation with added protection for organic vapors and acid?

    1 answer
    1. Alan

      2017-05-01 00:00:00

      This set up will give you the protection you need. Use this cartridge in-conjunction with either a 3M half mask or full mask.

  7. Brian Dean

    2018-01-29 15:01:24

    Will the 60923 be safe to use when cutting metal painted with lead paint using a cutting torch?

    1 answer
    1. Hannah .

      2018-01-30 20:07:36

      This would be a better filter for your application: https://www.pksafety.com/3m70p1fi.html

      We also sell a combination mask and this filter (one pair): https://www.pksafety.com/3m-7500-lead-dust-respirator-combo.html

Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.