This kit meets or exceeds the recommendations of the Environmental Protection Agency (EPA) and New York City Department of Health in their guidelines for mold remediation.
Mold can cause a variety of negative health effects. It grows in areas with elevated moisture levels and is common in buildings affected by flooding.
- Moldex 9000 Full Face Respirator Combo
- Disposable Tyvek TY122S HazMat Coverall Suit
- Multi-Gas Vapor Smart Cartridges (1 pair)
- Moldex 7940 P100 HEPA-Rated Filter Disks (1 pair)
- Moldex 7920 Piggyback Adapters (1 pair)
- MCR Safety Flex Tuff II Glove (1 pair)
- Ansel Sol-Vex Unlined Nitrile Chemical Resistant Glove (1 pair)
The specialized respirator kit from Moldex includes a full-face mask to prevent the inhalation of airborne mold spores from getting to you. Because mold can release volatile organic compounds (known as VOCs) that are thought to be the source of odor in spaces with mold and mildew problems, the kit includes activated charcoal filters as well as a P100 HEPA filter. Particles in the air are trapped by the filter, and odors are absorbed by the charcoal.
*Note: When choosing the size of the full face mask, keep in mind the medium sized mask fits about 80% of people. If you have sizing/fitting experience with glasses or hats that makes you think you are outside this range, consider the larger or smaller size.
Tyvek TY122S HazMat Coverall Suit
This disposable HazMat suit is used by professionals and do-it-yourselfers. It is ideal for mold treatment because it covers the head and ears and it stops dangerous particles down to one micron in size from getting to the skin. The attached hood and booties provide full-body protection.
MCR Safety Flex Tuff II Glove
The safety gloves feature a latex palm and fingers that provide grip and protection while doing demolition of mold-infested buildings or other heavy-duty projects.
Ansell Sol-Vex Unlined Nitrile Chemical Resistant Glove
These gloves are excellent for cleanup in wet environments. They protect against many chemicals, and are snag and puncture resistant. These are the gloves we recommend using when you are wiping down and decontaminating.
9001 - Moldex Full Face Mask (small)
9002 - Moldex Full Face Mask (medium)
9003 - Moldex Full Face Mask (large)
TY122S - Tyvek HazMat Coverall
9688 - MCR Flex Tuff Gloves
37-145 - Ansell Nitrile Gloves
7600 - Moldex Multi-Vapor Cartidges
7940 - Moldex P100 Filters
7920 - Moldex Piggyback Adapters
|Product Weight (lbs.)||No|
|Ship Weight (lbs.)||4.0000|
|Protection From||Most Dusts, Mold|
- Very Pleased Review by Todd
Was very happy with the kit. I removed moldy insulation in a hot attic. The mask never fogged up. I'm glad I purchased it.
(Posted on 4/20/2015)
- Good to great Review by Oldy Moldy
It has been many weeks since we used the kits. I wanted to review what worked and what didn't.
We had a tiny leak in the wall from the ice maker line in the kitchen. The kitchen was tiled, so it took quite a while for it to become obvious. So, we had a wall to tear out and the kitchen cabinets had to be repaired. Sections of the wall, cabinets and base boards were completely black with mold. Everyone in the family had a kit.
Fit---Suits were all large (only ones we could get). This turned out just fine. We taped them at the joints (top and bottom) and it actually gave us a better fit.
Gloves also fit everyone from 5-5 to 6-1.
Masks-- great fit. I have a full beard (jawline trim) and everyone including myself had zero pressure checks fails.
(Posted on 12/29/2014)
- Very Pleased Review by cher
I am very happy with my kit mask works very well . I didn't smell any mold or other odors while using this mask. shipping was also fast . I would order more.
(Posted on 10/2/2014)
- Very pleased Review by Julie
The kit was as described. It fit well and was of good quality. The mask was excellent. It has been a few weeks since I started removing the moldy sheetrock from my basement while wearing the suit and no adverse reactions so far.
(Posted on 8/3/2014)
- Accurate Review by beemerken
Good quality and thickness of coveralls, full face mask fit well and protected well in shipping. Sizing was correct.
(Posted on 7/30/2014)
Check items to add to the cart or select all
This Tyvek suit has material that is non-woven and made from flash spun, high density polyethylene. Which is essentially plastic and not breathable as it is made to keep out debris like mold and asbestos.
So, unfortunately it does get warm to hot while wearing this suit, and if you are wearing it in humid environments it would be ideal to take a break and hydrate ever so often.
0voteA: The suit isn't a liquid barrier, it will resist spray but you should avoid contact with water as liquids will soak through.
0voteA: Respirator sizing does not involve metrics, such as length, width, height or weight. There is no reference that insures choosing the correct size other than fit testing. That said, we can offer this guidance…
Small is for a petite woman, or other person who has noticeably small face. Smaller than average for sure.
Medium fits average faces, and should be appropriate for 75% or more of the adult population.
Large fits people who have noticeably large or long facial features.
Full face respirators are more forgiving on sizing than half face models, and they seal against smoother parts of your face. This makes your choice fairly easy.
0voteA: The suit is made of DuPont Tyvek, a non-woven ‘spun bonded’ polyethylene fabric. Very popular in the mold and asbestos remediation industry. It has exceptional barrier properties against very small particles, and some splash resistance against liquids.
- This Item: Mold Cleanup and Remediation Kit - Full Face and Body Protection
Moldex 7940 P100 Filter Disk (Pair)
$6.40 As low as: $6.05
Moldex 7600 Multi-Gas / Vapor Smart Cartridge (Pair)
$10.30 As low as: $9.75
Total Price $156.45
Total Price Excl. Tax: $156.45 Incl. Tax: $156.45
Order $99 or more and we'll cover shipping to anywhere in the contiguous United States.
Most Items Ship Same Day
Order by 4pm Eastern time, Monday through Friday and we can usually ship your order the same day, unless there is a stated lead time. Call us before 6pm Eastern time at 800-829-9580 and we may be able to arrange to ship your item today.
Amazing Product Experts
Our people are the best in the industry. Give us a call at 800-829-9580.