RAE Systems ToxiRAE II Hydrogen Sulfide 0-100ppm Toxic Gas Monitor

The RAE Systems Hydrogen Sulfide (H2S) ToxiRAE II is lightweight, rugged H2S detector that provides continuous readout of gas levels. The ToxiRAE II series has easily replaced batteries, and -unlike other H2S detectors in this category - can be turned on and off so sensors and batteries are on and ready when you are, but not wasted while not in use. The ToxiRAE single gas monitor measures H2S between the ranges of 0-100ppm with a resolution of 1.

Hydrogen Sulfide is a colorless, very poisonous and flammable gas with a similar smell of rotten eggs. It is slightly heavier than air which means it usually hangs near the ground.

The H2S ToxiRAE II for H2S will continually monitor the air it comes in contact with. If hazardous levels are reached, a loud siren will sound, as well as flashing lights and a vibration alert to warn workers in very noisy areas.

The ToxiRAE II attaches easily to clothing or belt with a strong alligator clip which is included.

Key Features:

Large, easy-to-read continuous display of gas concentration in ppm

Displays STEL, TWA, and Peak values

2 year warranty

IP Rating 65

Field replaceable filter and battery

Displays STEL, TWA, peak values and alarm minutes used

Varying audio alarm signals for different alarm conditions

Bright red flashing alarm

Loud, 90 dB buzzer

Built in vibration alarm

Holds peak values

Simple Calibration

Durable, high impact-resistant, carbon-loaded ABS housing

High resistant to RF interference

Hands-free use: can clip onto hardhat, shirt pocket, shoulder strap or belt

ToxiRAE II detector includes:

Sensor as specified (sensors are not interchangeable)

Operation and maintenance manual

Rugged stainless steel belt clip / hardhat adapter
Wrist strap

Calibration gas test adapter

High capacity Lithium battery installed

Part Number
045-0511-000

ToxiRAE II Information Video



Click here to read the ToxiRAE II Video Transcript