Home > Fall Safety Protection > Lanyards for Fall Protection > Shock Absorbing Lanyards > Economy Harness and Lanyard
Protecta Economy Harness and Lanyard
In Stock, Ships Today!
Meets or exceeds OSHA 1926 & ANSI Z359.1-1998 performance criteria! This is our most popular economy solution, featuring a Protecta AB17510 harness and a permanently attached lanyard, similar to the Protecta AE57610 FIRST shock absorbing 6 foot lanyard. This combination weighs very little and is great for meeting compliance requirements. Commonly worn when working on cherry pickers and short term or dirty jobs.
The three point harness features universal sizing, meant to fit people in the medium to XLarge range. It is constructed using 1.75 inch wide polyester web with a minimum tensile strength greater than 5,000 lbs. All hardware and buckles are made of zinc plated stamped steel to resist corrosion.
The six foot lanyard is made with 1-3/4 inch polyester webbing, with a single .8 inch opening double-locking snaphook, and includes a shock absorber encased in a transparent UV-resistant plastic sleeve. The shock absorber activates when a force of approximately 675 lbs. is applied and will extend up to 42 inches.
Meets or exceeds OSHA 1926 & ANSI Z359.1-1998 performance criteria.
Part Number:
AB17515
Meets or exceeds OSHA 1926 & ANSI Z359.1-1998 performance criteria! This is our most popular economy solution, featuring a Protecta AB17510 harness and a permanently attached lanyard, similar to the Protecta AE57610 FIRST shock absorbing 6 foot lanyard. This combination weighs very little and is great for meeting compliance requirements. Commonly worn when working on cherry pickers and short term or dirty jobs.
The three point harness features universal sizing, meant to fit people in the medium to XLarge range. It is constructed using 1.75 inch wide polyester web with a minimum tensile strength greater than 5,000 lbs. All hardware and buckles are made of zinc plated stamped steel to resist corrosion.
The six foot lanyard is made with 1-3/4 inch polyester webbing, with a single .8 inch opening double-locking snaphook, and includes a shock absorber encased in a transparent UV-resistant plastic sleeve. The shock absorber activates when a force of approximately 675 lbs. is applied and will extend up to 42 inches.
Meets or exceeds OSHA 1926 & ANSI Z359.1-1998 performance criteria.
Part Number:
AB17515
Overall Rating for Economy Harness and Lanyard
 | (based on 1 review) |  |
Harness
By Keith Robinson from Newnan, Georgia USA on May 17, 2011
I found this harness to be very useful for very basic fall protection. Nothing fancy,nothing extra, just a basic harness.Cons:
I wasn't expecting the lanyard to be permanently connected to the harness.I dislike this.I would recommend this item to a friend.
Our Price:$32.50 |
Our Price:$34.00 |
Our Price:$34.00 |
Our Price:$42.50 |
Our Price:$70.00 |
Our Price:$76.50 |
